ML160 plastic recycling machine(pull strip machine

Main Technical Parameter

Normal

Model	ML75	ML85	ML100	ML130	ML160	ML180
Screw diameter(mm)	75	85	100	130	160	180
L/D	26 to 33
Output(kg/h)	100-120	100-180	200-300	400-600	600-800	800-1000

Advanced (high efficiency with power saving)

Model	ML75B	ML85B	ML100B	ML130B	ML160B	ML180B
Screw diameter(mm)	75	85	100	130	160	180
L/D	26 to 37
Output(kg/h)	100-150	200-350	400 to 550	600 to 800	800 to 1000	1000-1200

General introduction:

From shredding compactor, the material is transported directly into the extruder by a belt conveyor without being precut or compressed. The rate of material feeding is controlled automatically by the current of the extruder motor and main extruder screw rotating speed. This design will keep material with balance feeding, and protect material from blocking and melting in the shredding compactor.

Degassing parts: natural degassing/ vacuum degassing

Melting plastic is filtered by a continuous melt filter (plate hydraulic screen filter, double volume screen changer) available with or without back-flushing system. According to material type, the pelletizing way can be equipped with a water ring, strand or underwater pelletizing system.

How it works:
Screw charger uploading material by timer
Feeder and extruder is controlled by inverter
Various L/D for Various material
Natures degassing, vacuums degassing adopting for moisture
pull strip cutting for perfect pellets shape

machine details

The particular advantage of the ML model

No need pre-heating and pre-cutting or other treatment of the material before extrusion.

It avoids the plastic precutting, the plastic bags and films and stretches can be fed directly in to the cutter compactor then crush, compress and heat, then it will go to the screw for plasticizing

Some washed 5-8% films can be feed directly, as it will be heated and dry in the compactor, then it will be degassed twice in the screw while plasticizing

Special designed screw and barrel, with experienced engineering we can offer and design for you the best screw and barrel to make the end pellets qualified

Cutter compactor:

As the conveyor directly connects with the compactor, the materials can follow the belt to cutter compactor, and the material will be cut and compressed. At the bottom of the cutter compactor equips with pipes with running water to cooling the material

Electricity Saving: 0.29-0.30kwh/kg

any other problem, please send us inquiry with getting more details!Thanks